BustedGear.com
Shop DIY Repairs Manufacturers Resources IFAQs About
Store Guide
Repair Parts
BATTERIES
Synthesizer batteries
Holders & Snaps
JACKS
Phone jacks
Power & Data jacks
KEYBOARD PARTS
Floppy drive belts
Key Contacts
Replacement Keys,
Springs & Bushings
KNOBS
Push Button
Rotary & Slider
MISCELLANEOUS
Rescued parts
PASSIVE COMPONENTS
Capacitors
Fuses
Pots & Encoders
Resistors
SEMICONDUCTORS
IC's
Wurlitzer transistors
SWITCHES
Amp footswitches
Panel switches
Tactile switches
Swag
Logo Tees
Vintage Magazines
Guitar Player


Pots &
Encoders

INDEX BY INSTRUMENT MAKE:
AKAI AMPEG E-MU SEQUENTIAL VOX
AKAI
Part # ENAKM2
ENAKM2
Click Photo to Enlarge


Installation Instructions

Buyer Comments

Akai MPC® 2000XL
Akai MPC® RENAISSANCE
Rotary Encoder

This factory-fresh replacement part fits the jog wheel of an MPC 2000XL or MPC RENAISSANCE Midi Production Center.

A new encoder fixes MPC problems like settings that change unevenly or that don't change at all.

Select Quantity:


FREE SHIPPING in U.S.A.
WE SHIP WORLDWIDE - see Storefront for details!

AMPEG®
TOP OF PAGE
Part # UB2-50KA
UB2-50KA
Click Photo to Enlarge

Ampeg B2
50kΩ Audio Pot

These are rescued, good condition 50KΩ audio-taper rotary pots for an Ampeg B2, B2R, or B2-RE bass amplifier.

They also fit other Ampeg gear.

** THESE ARE SOLD OUT **

PRICE - $9.75  USD each.

FREE SHIPPING in U.S.A.
WE SHIP WORLDWIDE - see Storefront for details!



TOP OF PAGE
Part # UB2-50KB
UB2-50KB
Click Photo to Enlarge

Ampeg B2
50kΩ Linear Pot

These are rescued, good condition, 50KΩ linear-taper rotary pots for an Ampeg B2, B2R, or B2RE bass amplifier.

They also fit other Ampeg gear.

** THESE ARE SOLD OUT **

PRICE - $9.75 USD each

FREE SHIPPING in U.S.A.
WE SHIP WORLDWIDE - see Storefront for details!

E-MU®
TOP OF PAGE
Part # POB10K-VK
POB10K-VK
Click Photo to Enlarge


Installation Instructions

E-MU Vintage Keys
Control Pot, 10kΩ Linear

These 10kΩ linear-taper, snap-in pots are for the E-MU Vintage Keys synthesizer.  The fourth terminal pin is a dummy pin.

They're factory-fresh, exact replacements for the Master Volume and the four Rotary Controller pots.

Select Quantity:


FREE SHIPPING in U.S.A.
WE SHIP WORLDWIDE - see Storefront for details!

SEQUENTIAL® CIRCUITS, INC.
TOP OF PAGE
Part # UP5-10K
UP5-10K
Click Photo to Enlarge

SCI Prophet-5
SCI Prophet-10
Front Panel Pot, 10kΩ Linear

These rescued, tested rotary pots are used for all the Prophet-5 and Prophet-10 front panel controls.  The Sequential Circuits part number is R-221.

They're right-angle, PC-mount 10 kΩ, linear taper pots with a 3/8" threaded bushing and a flatted nylon shaft.  They were made in the USA by Centralab.

PRICE - $24 USD each

FREE SHIPPING in U.S.A.
WE SHIP WORLDWIDE - see Storefront for details!

VOX VALVETRONIX
TOP OF PAGE
Part # POB10K-ADVT
POB10K-ADVT
POB10K-ADVT-WK
Click Photo to Enlarge





Vox AD15VT & AD30VT
Vox AD50VT & AD100VT
Vox AD60VT & AD120VT
Control Panel Pot

  • 10kΩ, linear taper
  • Long, right-angle PC pins
  • Body diameter:  5/8" (16mm)
  • Solid round shaft, 1/4" (6mm) diameter, 5/16" (9mm) long

This part is a drop-in replacement for most Vox Valvetronix control pots (see table below).

The pot has a solid shaft needing a setscrew knob instead of the original, friction-fit knob.

You can add SETSCREW KNOBS to your order using this drop-down menu:

CHOOSE POTS AND KNOBS:

FREE SHIPPING in U.S.A.
WE SHIP WORLDWIDE - see Storefront for details!

Vox Valvetronix
Repair Story

— This pot is a drop-in replacement for the following controls —

AD15VT AD30VT AD50VT AD100VT AD60VT AD120VT
Gain   |   Volume   |   Treble   |   Middle   |   Bass   |   Edit 1
Master Volume  
  Presence  |  Drive  |  Level  |  Speed  |  Feedback  |  Depths


®See trademark owners  HERE.

Shop       |       DIY Repairs       |       Manufacturers       |       Resources       |       IFAQs       |       About

Page design and content Copyright © Richard Diemer - All rights reserved