 |
|
Korg®, Kawai® & Roland® RAM Cards
|
|
|
CR2016 Replacement Battery
|
|
|
This fresh-production CR2016 battery powers
the RAM cards used by various synthesizers.
The battery fits into a holder that slides out from the card's edge.
This CR2016 fits the following cards.
|
Korg RAM Cards
|
|
MCR-02 |
MCR-03 |
|
SRC-512 |
|
|
Kawai RAM Cards
|
|
DC-8 — for Kawai K-Series synths |
|
Roland RAM Cards
|
|
M-128D — for D- and JV-Series synths |
|
M-256E — for D- and JV-Series synths |
|
|
SPECS
|
|
VOLTAGE / CAPACITY:
|
3 volts / 90 mAh
|
|
BATTERY
DIAMETER:
|
20.0 mm
|
|
BATTERY
THICKNESS:
|
1.6 mm
|
|
ANODE (-):
|
Lithium
|
|
CATHODE (+):
|
Manganese dioxide
|
|
ELECTROLYTE:
|
Sodium hydroxide |
|
BRAND:
|
Panasonic |
FREE SHIPPING in U.S.A.
NO INTERNATIONAL SHIPPING
|
|
|
|
Yamaha® RAM Cards
|
|
|
CR2025 Replacement Battery
|
|
|
This fresh-production CR2025 battery powers
the Yamaha® MCD64 memory card.
The battery fits under a cover
on the back of the card.
The MCD64 card fits into a card slot in the following synthesizers.
|
Yamaha®
|
|
SY77, SY85, SY99 |
|
TG Series |
TQ5 Series |
|
V-50 |
YS Series |
|
|
SPECS
|
|
VOLTAGE / CAPACITY:
|
3 volts / 165 mAh
|
|
BATTERY
DIAMETER:
|
20.0 mm
|
|
BATTERY
THICKNESS:
|
2.5 mm
|
|
ANODE (-):
|
Lithium
|
|
CATHODE (+):
|
Manganese dioxide
|
|
ELECTROLYTE:
|
Sodium hydroxide |
|
BRAND:
|
Panasonic |
FREE SHIPPING in U.S.A.
NO INTERNATIONAL SHIPPING
|
|
|
|
Yamaha®, Roland® & Kawai®
|
|
|
CR2032 Replacement Battery – 2 Solder Pins
|
|
|
|
|
SPECS
|
|
VOLTAGE / CAPACITY:
|
3 volts / 225 mAh |
|
TERMINALS:
|
2 solder pins
|
|
PIN SPACING:
|
15.2 mm
|
|
PIN WIDTH:
|
0.75 mm
|
|
BATTERY
DIAMETER:
|
20.0 mm
|
|
BATTERY
THICKNESS:
|
3.2 mm
|
|
BOARD STANDOFF:
|
5.0 mm
|
|
ANODE (-):
|
Lithium
|
|
CATHODE (+):
|
Manganese dioxide
|
|
ELECTROLYTE:
|
Sodium hydroxide
|
|
BRAND:
|
FDK (formerly SANYO)
|
FREE SHIPPING in U.S.A.
NO INTERNATIONAL SHIPPING
|
|
|
|
ROLAND®
|
|
TR-505 |
|
|
|
KAWAI®
|
|
K1 |
K1 ii |
K1R |
|
YAMAHA®
|
|
DX7 |
DX7 ii |
DX7 iiFD |
|
TF1 |
TG series |
TX series |
|
RY10 |
RY20 |
RY30 |
|
SY55 |
SY77 |
SY99 |
|
KX76 |
KX88 |
V50 |
|
We sell two replacement batteries for the gear listed to the
left. One style (below) has a yellow insulator around the rim
and stands off the PC board by about 1/16" (1.6 mm).
The other style (above) is not insulated and stands off the PC board
by about 3/16" (5 mm).
Both are fresh-production 2032 coin cells with two, 15.2 mm spaced PC pins
that solder directly to the printed circuit board. This is the most secure form of battery
installation.
|
|
|
|
|
SPECS
|
|
VOLTAGE / CAPACITY:
|
3 volts / 225 mAh |
|
TERMINALS:
|
2 solder pins
|
|
PIN SPACING:
|
15.2 mm
|
|
PIN WIDTH:
|
0.75 mm
|
|
BATTERY
DIAMETER:
|
20.0 mm
|
|
BATTERY
THICKNESS:
|
3.2 mm
|
|
BOARD STANDOFF:
|
1.6 mm
|
|
ANODE (-):
|
Lithium
|
|
CATHODE (+):
|
Manganese dioxide
|
|
ELECTROLYTE:
|
Sodium hydroxide
|
|
BRAND:
|
Panasonic
|
FREE SHIPPING in U.S.A.
NO INTERNATIONAL SHIPPING
|
|
|
|
Ensoniq, Roland, Oberheim, Korg, Akai, etc.
|
|
|
2032 Replacement Battery – 2 Solder Pins
|
|
|
|
|
SPECS |
|
VOLTAGE / CAPACITY:
|
3 volts / 190 mAh
|
|
TERMINALS:
|
2 solder pins |
|
PIN SPACING:
|
20.5 mm
|
|
PIN WIDTH:
|
0.75 mm
|
|
BATTERY
DIAMETER:
|
20.0 mm
|
|
BATTERY
THICKNESS:
|
3.2 mm
|
|
ANODE (-):
|
Lithium
|
|
CATHODE (+):
|
Carbon monofluoride
|
|
ELECTROLYTE:
|
Organic
|
|
BRAND:
|
Panasonic
|
FREE SHIPPING in U.S.A.
NO INTERNATIONAL SHIPPING
|
|
|
|
AKAI
|
|
AX-60 |
AX-73 |
AX-80 |
|
ENSONIQ
|
|
SQ-1 |
SQ-2 |
SQ-R |
|
KS-32 |
DP-2 |
DP-4 |
|
DP Plus |
VFX |
|
|
KAWAI®
|
|
K3 |
|
|
|
KORG®
|
|
X5 |
X5D |
Poly-800ii |
|
OBERHEIM
|
|
Matrix 6, 6R |
Matrix 1000 |
Xk |
|
ROLAND®
|
|
Alpha Juno-1 |
Alpha Juno-2 |
Juno-106 |
MKS-20
MKS-50 |
MKS-100 |
S-10 |
|
YAMAHA®
|
|
|
RX Series |
|
|
We sell two replacement batteries for the gear listed to the left.
One style (below) has a yellow insulator around the rim.
The other style (above) does not have an insulator.
Both are fresh-production 2032 coin cells with two, 20.5 mm spaced PC pins
that solder directly to the printed circuit board. This is the most secure form of battery
installation.
|
|
|
|
|
SPECS |
|
VOLTAGE / CAPACITY:
|
3 volts / 225 mAh |
|
TERMINALS:
|
2 solder pins
|
|
PIN SPACING:
|
20.5 mm
|
|
PIN WIDTH:
|
0.75 mm
|
|
BATTERY
DIAMETER:
|
20.0 mm
|
|
BATTERY
THICKNESS:
|
3.2 mm
|
|
ANODE (-):
|
Lithium
|
|
CATHODE (+):
|
Manganese dioxide
|
|
ELECTROLYTE:
|
Sodium hydroxide
|
|
BRAND:
|
Panasonic
|
FREE SHIPPING in U.S.A.
NO INTERNATIONAL SHIPPING
|
|
|
|
Korg® DW Series, N264, N364
|
|
|
CR2032 Replacement Battery – 3 Solder Pins
|
|
|
This fresh-production CR2032 lithium coin cell has three solder pins
that solder directly to the printed circuit board. This is the most secure form of battery
installation.
The two positive pins are 10 mm apart and the negative pin
is 15 mm from them.
This item replaces the internal battery in the following gear.
|
KORG®
|
|
DW Series |
EX8000 |
|
N264 |
N364 |
|
|
SPECS |
|
VOLTAGE / CAPACITY:
|
3 volts / 200 mAh |
|
TERMINALS:
|
3 solder pins
|
|
PIN GRID:
|
15.2mm L x 10.2mm W
|
|
PIN WIDTH:
|
0.75 mm
|
|
BATTERY
DIAMETER:
|
20.0 mm
|
|
BATTERY
THICKNESS:
|
3.2 mm
|
|
ANODE (-):
|
Lithium
|
|
CATHODE (+):
|
Manganese dioxide
|
|
ELECTROLYTE:
|
Sodium hydroxide
|
|
BRAND:
|
FDK (formerly SANYO)
|
FREE SHIPPING in U.S.A.
NO INTERNATIONAL SHIPPING
|
|
|
|
Nord® and E-Mu® RAM Cards
|
|
|
CR2325 Replacement Battery
|
|
|
This fresh-production CR2325 battery powers
the RAM cards used by various Nord and E-Mu synths.
The
battery fits into a holder that swings out from the card's edge.
The CR2325 fits the following cards.
|
Compatible RAM Cards
|
|
NORD Lead |
NORD Lead 2 |
|
E-MU Morpheus |
NORD Rack 2 |
|
|
SPECS |
|
VOLTAGE / CAPACITY:
|
3 volts / 190 mAh
|
|
TERMINALS:
|
Requires holder |
|
BATTERY
DIAMETER:
|
23.0 mm
|
|
BATTERY
THICKNESS:
|
2.5 mm
|
|
ANODE (-):
|
Lithium
|
|
CATHODE (+):
|
Manganese dioxide
|
|
ELECTROLYTE:
|
Sodium hydroxide |
|
BRAND:
|
Renata |
FREE SHIPPING in U.S.A.
NO INTERNATIONAL SHIPPING
|
|
|
|
Alesis® Andromeda, Fusion, SR-16, QS
|
|
|
BR2325 Replacement Battery – 3 Solder Pins
|
|
|
This fresh-production BR2325 coin cell has 3 circuit
pins that solder directly to the
printed circuit board. This is the most secure form of battery
installation.
The two positive pins are 7.5 mm apart and the negative pin
is 20 mm from them.
This item replaces the internal battery in the following gear.
|
ALESIS®
|
|
Andromeda |
Fusion |
SR-16 |
|
QS Series |
|
|
SPECS |
|
VOLTAGE / CAPACITY:
|
3 volts / 165 mAh
|
|
TERMINALS:
|
3 solder pins |
|
PIN GRID:
|
20.5 mm L x 7.5 mm W
|
|
PIN WIDTH:
|
0.75 mm
|
|
BATTERY
DIAMETER:
|
23.0 mm
|
|
BATTERY
THICKNESS:
|
2.5 mm
|
|
ANODE (-):
|
Lithium
|
|
CATHODE (+):
|
Carbon monofluoride
|
|
ELECTROLYTE:
|
Organic
|
|
BRAND:
|
Panasonic
|
FREE SHIPPING in U.S.A.
NO INTERNATIONAL SHIPPING
|
|
|
|
Ensoniq TS & KT Series
|
|
|
BR2330 Replacement Battery – 2 Solder Tabs
|
|
|
This fresh-production BR2330 coin cell has 20mm spaced tabs that solder directly to the
printed circuit board. This is the most secure form of battery
installation.
This item replaces the internal battery in the following gear.
|
ENSONIQ
|
|
TS-10 |
TS-12 |
E-Prime |
|
KT-76 |
KT-88 |
|
|
|
SPECS |
|
VOLTAGE / CAPACITY:
|
3 volts / 255 mAh
|
|
TERMINALS:
|
2 solder tabs |
|
TAB SPACING:
|
20.5 mm
|
|
TAB WIDTH:
|
1.8 mm
|
|
BATTERY
DIAMETER:
|
23.0 mm
|
|
BATTERY
THICKNESS:
|
3.0 mm
|
|
ANODE (-):
|
Lithium
|
|
CATHODE (+):
|
Carbon monofluoride
|
|
ELECTROLYTE:
|
Organic
|
|
BRAND:
|
Panasonic
|
FREE SHIPPING in U.S.A.
NO INTERNATIONAL SHIPPING
|
|
|
|
Yamaha® RAM4 Memory Cartridges
|
|
|
CR2430 Replacement Battery – Surface Mount Tabs
|
|
|
This fresh-production CR2430 coin cell, with two surface-mount solder
tabs, is used in Yamaha RAM4 memory
cartridges.
The RAM4 cartridge fits the cartridge slot of various vintage gear, including
the following:
|
YAMAHA®
|
|
DX7ii |
DX7s |
DX11 |
|
RX5 |
RX7 |
DMP7 |
|
|
TX802 |
|
|
|
SPECS |
|
VOLTAGE / CAPACITY:
|
3 volts / 285 mAh
|
|
TERMINALS:
|
2 surface-mount tabs |
|
TAB WIDTH:
|
3.0 mm
|
|
TAB SPAN:
|
34.5 mm
|
|
BATTERY
DIAMETER:
|
24.0 mm
|
|
BATTERY
THICKNESS:
|
3.0 mm
|
|
ANODE (-):
|
Lithium
|
|
CATHODE (+):
|
Manganese dioxide
|
|
ELECTROLYTE:
|
Sodium hydroxide
|
|
BRAND:
|
Renata |
FREE SHIPPING in U.S.A.
NO INTERNATIONAL SHIPPING
|
|
|
Roland® Juno-60, Jupiter-6, JX-3P,
MKS-80, SDE-1000, SRV-2000, etc.
|
|
|
CR1/3N Surface-Mount Battery Holder with Battery
|
|
|
This Battery & Holder combo replaces the obsolete, solder-tab battery
used in many vintage Roland instruments.
The surface-mount holder solders directly to the instrument's
printed circuit board with no additional wires or stick-on
attachments.
It makes
future battery changes a snap, with no risk of damage to the printed
circuit foils.
The holder is fully described on our
BATTERY HOLDERS PAGE.
The included battery, Part #BT1/3N-C, is fully described in the
next
store item.
|
|
HOLDER
SPECS
|
|
LENGTH:
|
14.5 mm (0.570") |
|
LENGTH WITH TABS:
|
19.0 mm (0.748") |
|
WIDTH:
|
13.7 mm (0.540")
|
|
HEIGHT:
|
12.9 mm (0.506")
|
|
CONTACTS:
|
Phosphor Bronze with
Gold Plate
|
|
CONTACT WIDTH:
|
3.2 mm (0.125")
|
|
BASE MATERIAL:
|
High Temperature Nylon |
FREE SHIPPING in U.S.A.
NO INTERNATIONAL SHIPPING
This battery & holder combo fits the following Roland instruments:
|
ROLAND®
|
|
Juno-60 |
Jupiter-6 |
JX-3P |
|
MKS-30 |
MKS-80 |
GR-700 |
|
SDE-1000 |
SDE-2500 |
SDE-3000 |
|
DDR-30 |
SRV-2000 |
Rhodes MK-80 |
|
|
|
|
CR1/3N Replacement Battery
|
|
|
For the above Battery Holder
|
|
|
This fresh-production lithium cell fits our surface-mount battery
holder, listed above.
It's equivalent to battery types CR1/3N,
DL1/3N, LR1/3N, 2L76, 2LR76, 5008L, and K58L.
|
|
BATTERY
SPECS |
|
VOLTAGE / CAPACITY:
|
3 volts / 160 mAh
|
|
TERMINAL TYPE:
|
Flat Top |
|
BATTERY
DIAMETER:
|
11.6 mm (0.46")
|
|
BATTERY HEIGHT:
|
10.8 mm (0.44")
|
|
ANODE (-):
|
Lithium
|
|
CATHODE (+):
|
Manganese dioxide
|
|
ELECTROLYTE:
|
Sodium hydroxide
|
FREE SHIPPING in U.S.A.
NO INTERNATIONAL SHIPPING
|
|
|
|
Korg® Poly-61 and Polysix
|
|
|
Replacement Varta Battery – 3 Solder Pins
|
|
|
This fresh-production, rechargeable NiMH battery has three PC-pins
that solder directly to the
printed circuit board. This is the most secure form of battery
installation.
It's a replacement for the obsolete Varta 3/170DK NiCad
batteries used in the Korg Poly-61 and
Korg Polysix synths.
This battery also replaces the Varta 3/V170R, 3/170DK-SLF, 3/V150H, 3/V150R,
3/150DKO-PC, 3/V100R, and 3/100DKO-PC Nickel Cadmium batteries.
This NiMH battery contains no cadmium, an environmentally hazardous
heavy metal, highly toxic to all higher forms of life and
restricted by the EU. Also 0% lead and 0% mercury.
This item replaces the memory backup battery in the following gear.
|
KORG®
|
|
Poly-61, 61M |
Polysix |
SDD3000 |
|
|
SPECS |
|
NOMINAL VOLTAGE:
|
3.6 volts |
|
NOMINAL CAPACITY:
|
140 mAh |
|
TYPICAL CAPACITY:
|
150 mAh |
|
TERMINALS:
|
3 solder pins
|
|
PIN GRID:
|
18.2 mm L x 10 mm W
|
|
PIN WIDTH:
|
1.0 mm
|
|
BODY
DIMENSIONS:
|
26.5 mm wide x 18.8 mm long x 15 mm high
|
|
CHEMISTRY:
|
Nickel—metal hydride |
|
CATHODE (+):
|
Nickel oxyhydroxide, (NiO-OH)
|
|
ANODE (-):
|
Hydrogen-absorbing alloy |
|
ELECTROLYTE:
|
Potassium hydroxide
|
|
BRAND:
|
VARTA
|
|
NOTES:
|
German quality, sealed cells, direct replacement for Ni-Cad
rechargeables
|
|
LIFE EXPECTANCY:
|
6 Years (20°C)
|
FREE SHIPPING in U.S.A.
NO INTERNATIONAL SHIPPING
|
|
|
|
®See trademark owners
HERE.
|
|
|
