USB Type 'B' Jack for AKAI, ALESIS,
M-AUDIO, ROLAND, YAMAHA, etc. |
|
|
|
The following table lists a few of the many music keyboards that use this USB jack:
|
This PC-mount, Type 'B' USB jack is a replacement part for many synthesizers,
workstations, and MIDI controllers, including those by Akai, Alesis, Casio,
Korg, M-Audio, Novation, Roland, Yamaha and others.
FREE SHIPPING in U.S.A.
WORLDWIDE SHIPPING
See Shipping for details!
|
|
ACCESS
|
|
Virus T1 |
|
AKAI®
|
MPK49 |
MPK61 |
MPK88 |
|
MPK249 |
|
ALESIS®
|
V49 |
Q25 |
Q49 |
QX25 |
QX49 |
Vortex |
DAVE SMITH INSTRUMENTS®
|
|
Prophet 12 |
|
EDIROL®
|
|
PCR Series |
|
|
KORG®
|
|
Triton Extreme |
|
M-AUDIO®
|
Axiom 25 |
Axiom 49 |
Axiom Pro 49 |
Axiom 61 |
Axiom Pro 61 |
KeyRig Series |
Keystation Series |
Key Studio |
NOVATION®
|
|
Impulse 49 |
|
ROLAND®
|
PCR Series Controllers |
YAMAHA®
|
MM6 |
MM8 |
S90 |
|
|
USB Type 'A' Jack for KORG, etc. |
|
|
|
KORG®
|
Pa3X |
Triton Extreme |
|
|
This PC-mount, Type 'A' USB jack is a replacement part for many workstations
including the Korg Triton Extreme and the
Korg Pa3X professional arranger.
This USB Type A jack is Korg part #CON0010009.
PRICE - $10.95 USD
** THIS JACK IS OUT OF STOCK **
FREE SHIPPING in U.S.A.
WORLDWIDE SHIPPING
See Shipping for details!
|
|
Power Jack for CASIO® Privia, etc.,
KORG Krome, M50, King Korg, etc.,
VOX VT20X, VT40X, VX11, etc. |
|
|
|
— Some gear using these power jacks —
CASIO®
|
AP220, 245 |
AP260, 270 |
AT3, AT5 |
CDP120 |
CDP130, 135 |
CDP220, 230, 235 |
CDP240 |
CDPS90, 100 |
CDPS150, 350 |
CTK6000 |
CTK6200, 6250 |
CTK7000, 7200 |
CTX3000 |
PX130, 135 |
PX150, 160 |
PX330, 350, 360 |
PX3, PX5 |
PX560 |
PX730, 750, 770 |
PX7 |
PX870 |
PXS1000, 3000 |
WK6500, 6600 |
WK7500, 7600 |
KORG®
|
B1 |
B2 |
ESX-1 / 1SD |
King Korg |
Krome
61, 73, 88 |
M50
61, 73, 88 |
KP3 |
PA300 |
PA500 |
R3 |
SP170 |
SP280 |
VOX®
|
AV15 |
VT20X, VT40X |
VX11 |
|
This PC-mount, coaxial power jack has a center female contact and is
used in many Casio AP, CDP, CTK, PX, and WK series digital pianos
(see table below).
It also fits a number of Korg instruments and several Vox
guitar amps (see table
below).
This replacement jack mates with the Casio AD-A12150LW
power supply.
|
|
Power Jack for the YAMAHA P95, P105, PSRE433 & PSRE443, etc. |
|
|
|
— Some gear using these power jacks —
YAMAHA®
|
P-95 |
P-105 |
PSR-E433 |
P-95B |
P-105B |
PSR-E443 |
|
This is a 3-pin, PC-mount, low power DC coax jack with a 2.1mm center
pin, a normally closed switch, and side mounting-support wings.
It serves as the DC power inlet jack in
some Yamaha pianos and synthesizers. The jack is Yamaha part #WZ704401.
THESE ARE TEMPORARILY OUT OF STOCK
FREE SHIPPING in U.S.A.
WORLDWIDE SHIPPING
See Shipping for details!
|
|
Power Jack for the MOOG® Rogue |
|
|
|
• Moog Rogue
Installation Instructions
|
This is a PC-mount, ⅛" (3.5mm) mono phone jack with a tip shunt.
It's used as the power jack in Moog Rogue synthesizers.
This jack is an exact replacement for the original Moog Rogue jack.
FREE SHIPPING in U.S.A.
WORLDWIDE SHIPPING
See Shipping for details!
|
|
AC Wall Plug — Two-Prong, Polarized |
|
|
|
SPECS
|
ELECTRICAL
RATING:
|
15 Amp / 125 Volt
UL Listed |
MAXIMUM CORD DIAMETER:
|
0.328 inches (8.3mm) |
TERMINALS:
|
Screw connections
Spring action prongs
Silver - neutral
Brass - hot
|
HOUSING:
|
High impact-resistant thermoplastic, black |
|
This polarized plug has an impact resistant black
housing and fits a round power cord.
The prongs are color-coded and have screw terminals for secure
connection.
A polarized plug can protect
a guitar player from ground shocks when using a vintage amp.
The following link shows how to install a polarized plug on a
vintage amp:
|
|
AC
Inlet Jack for
Fender® Amps,
Roland Juno-106, etc. |
|
|
|
SPECS
|
PANEL CUTOUT:
|
27mm X 20mm |
PANEL THICKNESS:
|
0.8mm ~ 1.5mm |
TERMINALS:
|
Quick Connect
|
TERMINAL WIDTH:
|
4.8mm
|
• Replacing a Fender®
Super Champ AC jack
• Updating a Roland®
Juno-106 AC jack
|
This AC jack fits most Fender amps having detachable power cords, like the Super Champ XD and
X2.
It snaps into the amp's rear panel and connects with push-on wires ‒
no
soldering is required. This part is equivalent to Fender part #0054642000.
This jack also replaces the obsolete, 2-pin AC receptacle used in Roland®
model synths like the
Juno-106.
The jack snaps
into the Juno's rear panel ‒ soldering is required.
FREE SHIPPING in U.S.A.
WORLDWIDE SHIPPING
See Shipping for details!
|
|
AC Power Jack for vintage ARP®
& WURLITZER® keyboards |
|
|
|
|
This metal, oval power jack (AC inlet)
has 3 round pins instead of the flat blades used
today. This is a rare item.
It's used in early
Wurlitzer 200 & 200A series electric pianos and in Arp 2600 & 2500
synthesizers. It's also found in old Steiner Parker synths, Oberheim white-faced synths,
and others.
** THESE ARE SOLD OUT **
FREE SHIPPING in U.S.A.
WORLDWIDE SHIPPING
See Shipping for details!
|
|
|
|
|
|
®See trademark owners
HERE.
|
|